Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

The Functioning of the Lighting System in a Jeep Cherokee

Model: Jeep Cherokee KL, MK 5 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Headlight bulb

See other generations:
Video tutorial

This video explains the functioning of the lighting system in a latest model Jeep Cherokee. As the first step, position yourself in the driver's seat and turn on the ignition.

Beneath the steering wheel, on the lower left, you will find a knob with all the lighting settings. Check the knob's position; if it is set to 0, the lights will be off. In position 1, only the position lights will be on. In position 2, the dipped headlights will be activated.

In position 3, it is set to auto, so the vehicle will automatically detect when to turn on the lights. Finally, if you press the knob button, the fog lights will be turned on; simply press the button again to switch them off.


Updated on 11 June 2026 by ScegliAuto


Related tutorials

Where is the fuse box in the Jeep Cherokee?
Where is the fuse box in the Jeep Cherokee?
Jeep Cherokee (2013-2023 / KL, MK 5) The fuses in the Jeep Cherokee are located inside the designated fuse boxes within the vehicle: this model has two. The first is positioned behind th…
How to replace the parking sensors on a Jeep Grand Cherokee?
How to replace the parking sensors on a Jeep Grand Cherokee?
Jeep Cherokee (2013-2023 / KL, MK 5) To replace the parking sensors on a Jeep Grand Cherokee, remove the screws securing the bumper to access its rear section. The parking sensors are lo…
Guide to Replacing the Timing Belt on the Jeep Cherokee 2.4L
Guide to Replacing the Timing Belt on the Jeep Cherokee 2.4L
Jeep Cherokee (2002-2007 / MK 3, KJ) Today's guide will show you the main steps to remove and replace the timing belt on the Jeep Cherokee 2.4L. First, open the bonnet of your car and be…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos