Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Oil Service light on the Jeep Cherokee?

Model: Jeep Cherokee KL, MK 5 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Service warning light

See other generations:
Video tutorial

To reset the Oil Service light on the Jeep Cherokee, turn the key in the ignition cylinder so that the instrument cluster is on, but the engine is off. Next, press the accelerator pedal fully three times. Once this operation is completed, check that the Oil Service light has disappeared from the instrument cluster.

To confirm that the reset was successful, turn off and then turn on the instrument cluster again, ensuring the light is completely gone.


Updated on 13 June 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Service Light on the Jeep Cherokee?
How to Reset the Oil Service Light on the Jeep Cherokee?
Jeep Cherokee (2013-2023 / KL, MK 5) To reset the Oil Service light on the Jeep Cherokee, start the engine using the button located to the right of the steering column: once the engine i…
How do you reset the Service light on the Jeep Cherokee?
How do you reset the Service light on the Jeep Cherokee?
Jeep Cherokee (2013-2023 / KL, MK 5) To completely make the Service light disappear from the instrument panel of the Jeep Cherokee, you will need to insert the ignition key into the corr…
How to Reset the Service Light on a Jeep Cherokee?
How to Reset the Service Light on a Jeep Cherokee?
Jeep Cherokee (2013-2023 / KL, MK 5) To reset the Service light on the Jeep Cherokee, insert the ignition key, turning it in the ignition switch, and then press the button to start the i…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos