Do it yourself
| ||||
|
Jeep Cherokee - Video tutorial
Model: Jeep Cherokee
MK 5, KL
- Years 2013-2023 The operation of resetting the Oil Service light on the Jeep Cherokee is done by turning on the engine using the dedicated button located to the right of the steering column. Once the engine is turned on, you will need to navigate to the menu on the instrument cluster using the directional controls on the left side of the steering wheel. You will need to find the option that indicates the remaining life of the oil. Once this screen is displayed, you will need to hold down the OK button until the remaining oil life is reset. At this point, you can release the button and verify that the reset has occurred.
Posted on 20 October 2023 by ScegliAuto
How do you reset the Jeep Cherokee Oil Service light?
Jeep Cherokee (2013-2023 / MK 5, KL) In order to reset the Jeep Cherokee's Oil Service warning light, you need to turn the key in the appropriate cylinder, so that the instrument panel i
How to reset the service light on the Jeep Cherokee.
Jeep Cherokee (2013-2023 / MK 5, KL) Today's steps will show us how to reset the engine oil (service) light on the Jeep Cherokee. First, we get into the car and start the instrument pane
Resetting the oil change (service) warning light on the Jeep Cherokee (2018)
Jeep Cherokee (2013-2023 / MK 5, KL) Today we will see the instructions needed to reset the oil change routine maintenance service light on the 2018 5th Generation Jeep Cherokee. First o Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.065
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |