Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Service Light on the Jeep Compass

Model: Jeep Compass MK 1, MK 49 - Years 2006-2016
Part: Service warning light

To reset the oil change service light on the vehicle, follow these steps: enter the cabin and sit in the driver's seat. No commands are needed to reset the indication, but you must turn the key and switch on the ignition (the display will show "oil change service"). Then, press the accelerator pedal fully three times in a row. After that, release the pedal and turn the key to switch off the ignition. This will reset the oil change indication.

Updated on 24 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Change Warning Light on the Jeep Compass
How to Reset the Oil Change Warning Light on the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) In this tutorial, follow the necessary steps to reset the service warning light for the oil change on the Jeep Compass. First, get inside the vehicle…
How to Reset the Oil Change Light on a Jeep Compass
How to Reset the Oil Change Light on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Before you can start, sit in the driver's seat of your Jeep Compass. Begin by activating the instrument cluster without starting the engine by pressi…
How to Reset the Service Light on a Jeep Compass?
How to Reset the Service Light on a Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To reset the Service light on a Jeep Compass, start by turning on the ignition to check that the light is present on the instrument cluster. Once the…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos