Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the oil change service light on the Jeep Cherokee

Model: Jeep Cherokee KL, MK 5 - Years 2013-2023
Part: Warning light – error code

To reset the oil change service light on your vehicle, follow these steps: enter the cabin and sit in the driver's seat. When you turn on the ignition, the "oil change service" indicator will appear. At this point (with the engine off), press the accelerator pedal fully and quickly three times. After that, release the pedal and turn the key to switch off the ignition. This will reset the oil change service light, which you can verify by turning the ignition back on to check that it has turned off.

Updated on 24 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Jeep Cherokee (2013-2023 / KL, MK 5) Today, follow these instructions to reset the service warning light for the oil change on the 2018 Jeep Cherokee, fifth generation. First, get inside…
Jeep Cherokee (2013-2023 / KL, MK 5) In this video, you can see how to reset the oil service warning light on the Jeep Cherokee, an operation to be performed only after completing the sc…
Jeep Cherokee (2013-2023 / KL, MK 5) Resetting the oil change light on a Jeep Cherokee is a routine operation that should be performed after every oil change and filter replacement. This…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos