Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the steering wheel airbag from the Jeep Compass?

Model: Jeep Compass MK 1, MK 49 - Years 2006-2016
Part: Airbag

To remove the steering wheel airbag from the Jeep Compass, loosen the three screws located at the back of the airbag on the left side, right side, and in the central bottom area. At this point, the airbag can be pulled away from the centre of the steering wheel by disconnecting the connectors located underneath; this will allow for the complete removal of the airbag, which can then be replaced with a new part. The new part must be connected to the connectors so that it can be reattached to the centre of the steering wheel with the appropriate screws.

Updated on 7 July 2026 by ScegliAuto

Video tutorial

Related tutorials

In the Jeep Compass, how is the passenger airbag activated?
In the Jeep Compass, how is the passenger airbag activated?
Jeep Compass (2016-2025 / 552, MK 2) For specific needs, it is possible to deactivate the front passenger airbag protection in a car, for example to install a child seat or to perform ma…
How to deactivate the passenger airbag on a Jeep Compass
How to deactivate the passenger airbag on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Through this very useful video guide today, we can see how to deactivate the passenger side airbag of a Jeep Compass, model in production from 2016 o…
How to Disable the Passenger Airbag on the Jeep Compass 2
How to Disable the Passenger Airbag on the Jeep Compass 2
Jeep Compass (2016-2025 / 552, MK 2) In this brief and simple guide, learn how to disable the front passenger airbag on the Jeep Compass second generation, from 2021. First, get inside t…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos