Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery of the Jeep Renegade?

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Key

To replace the remote battery of the Jeep Renegade, pull the switch located on the top of the device to extract the key inside. Once removed, lever inside its housing to detach the plastic cover on the back of the device. When the cover is off, you can slide out the battery from the remote and insert the new one into its slot. Finally, close the remote by repositioning the panel that was previously removed.

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the battery of the Jeep Renegade remote control?
How do you replace the battery of the Jeep Renegade remote control?
Jeep Renegade (2014-2023 / ) To replace the battery of the Jeep Renegade remote control, you need to remove the key from the top of the device so that you can pry open its housin…
Replacing the Key Fob Battery on a Jeep Renegade
Replacing the Key Fob Battery on a Jeep Renegade
Jeep Renegade (2014-2021 / ) The video shows how to replace the battery in the key fob of a Jeep Renegade. This is a very simple operation that can be done in just a minute on yo…
How to Replace the Key Fob Battery of the Jeep Renegade?
How to Replace the Key Fob Battery of the Jeep Renegade?
Jeep Renegade (2014-2021 / ) To replace the key fob battery of the Jeep Renegade, lower the lever located at the back of the fob, just below the chrome cover. This will allow you…

Other guides you may be interested in

    Frequently Asked Questions

    • Jeep Renegade 2014-2026 - Why is the electronic key no longer detected in the Jeep Renegade? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos