Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin filter in the Jeep Wrangler?

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Cabin air filter

See other generations:
Video tutorial

To replace the cabin filter in the Jeep Wrangler, open the glove compartment located on the passenger side. Once the glove compartment is open, unclip the internal fastening clips so that the compartment can be completely removed, giving access to the components at the back.

Here, lift the plastic grille to remove the filter positioned inside. After the old filter has been removed, you can insert the new one and reassemble the glove compartment.


Updated on 29 July 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter of the Jeep Wrangler?
How to Replace the Cabin Filter of the Jeep Wrangler?
Jeep Wrangler (2007-2018 / JK, MK 3) To replace the cabin filter of the Jeep Wrangler, open the glove compartment on the passenger side by detaching the side clips. This allows you to co…
How to Replace the Cabin Filter in a Jeep Wrangler?
How to Replace the Cabin Filter in a Jeep Wrangler?
Jeep Wrangler (2007-2018 / JK, MK 3) In this video, see how to replace the cabin filter in a Jeep Wrangler, a very simple and quick operation. The filter is located behind the glove comp…
How to Replace the Starter Motor on a Jeep Wrangler
How to Replace the Starter Motor on a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) To replace the starter motor on a Jeep Wrangler, access it from inside the wheel arch of the front right wheel. First, open the bonnet and disconnect…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos