Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on the Jeep Compass - Renegade

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

See other generations:
Video tutorial

Today's guide will show you the procedure to reset the service light for the regular maintenance of the engine oil change on the Jeep Compass, as well as the Renegade. First, get into the vehicle and start pressing and holding the accelerator pedal; then turn on the ignition by pressing the start button once, as shown in the video.

At this point, press the brake pedal five times, then turn off the ignition and release the accelerator; now start the engine to complete the procedure!


Updated on 5 September 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light on a Jeep Compass
How to Reset the Tyre Pressure Warning Light on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Resetting the TPMS warning light for tyre pressure should only be done after inflating the tyres according to the instructions in the owner's manual.…
Resetting the Service Light on a Jeep Compass
Resetting the Service Light on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) In this video tutorial, you will find instructions on how to reset the service light for the routine maintenance oil change on a second-generation Je…
How to Reset the Service Light on a Jeep Compass
How to Reset the Service Light on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) After completing all routine maintenance tasks such as oil change, coolant replacement, filter changes, and tyre checks, you can proceed to reset the…

Other guides you may be interested in

    Frequently Asked Questions

    • Compass 2016-2025 - How to reset the "Service" light on a Jeep Compass? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos