Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Wrangler
    4. : How to replace the battery of the Jeep Wrangler 3 key

Jeep Wrangler - Video tutorial

Model: Jeep Wrangler JK, MK 3 - Years 2007-2018
Part: Key
Operation: How to replace the battery of the Jeep Wrangler 3 key

When the key of your third series Jeep Wrangler suddenly stops working, you don't necessarily have to buy a new one. In fact, you can solve the problem by replacing the small button battery located inside it yourself. Let's find out together how to perform this operation. First of all, get a flat-head screwdriver and use it to remove the key cover and then locate the exhausted battery. At this point, all you have to do is remove the battery in question and replace it with a new one (model ECR 2032).


Posted on 3 March 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos