Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing a Rubber Seal Kit

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Accessory kit

In this guide, replace some rubber parts, specifically the seal kit, which has become worn and inefficient. Start by removing the old piece and explaining its function. Once all screws are undone, gradually detach the piece from the bodywork. After this operation, first fit the front part, which will hold the latch securely. Once done, fit and screw in the other part. By taking these precautions, ensure all parts are fitted correctly and guarantee maximum efficiency from the piece.

Updated on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change a Wheel on Your Car
How to Change a Wheel on Your Car
Jeep Wrangler (2007-2018 / MK 3, JK) Start by opening the boot and lifting the panel that covers the wheel change kit. Next, remove the wheel cover located on the rear of the car and uns…
How to Remove the Spare Wheel from the Jeep Wrangler
How to Remove the Spare Wheel from the Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) If you need to use the spare wheel on the vehicle or simply want to remove it, just follow these steps. Before you start, ensure that the car's engin…
How to Maintain the Coolant in Your Jeep Wrangler
How to Maintain the Coolant in Your Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) To maintain your Wrangler, start by checking the coolant level in the engine cooling system. Remove the rubber hooks at the sides of the bonnet. Lift…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos