Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Compass
    4. : Location of the fuse box of the Jeep Compass

Jeep Compass - Video tutorial

Model: Jeep Compass MK 2, 552 - Years 2016-2024
Part: Fuse box
Operation: Location of the fuse box of the Jeep Compass

If we are looking for a solution to a malfunction of a component of the electrical system of the Jeep Compass, it will be useful to know the location of the boxes containing the fuses in order to carry out checks and replace any burnt components. The first one can be found in the lower part of the dashboard, under the headlight controls, on the left of the steering wheel. Two more can be found in the engine compartment, one to the right of the battery and the other inserted in the positive terminal clamp. The last box can be found in the trunk, on the left, behind a small door on the wheel arch. To quickly find the fuse related to the circuit under examination, consult the attached diagram.


Posted on 2 April 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Compass 2006-2016 - Where is the headlight fuse located in the Jeep Compass? Read Answer
    • Compass 2006-2016 - Where are the fuse boxes located in the Jeep Compass? Read Answer
    • Compass 2016-2025 - Where are the fuse boxes located on the Jeep Compass? Read Answer
    • Compass 2006-2016 - Where is the fuse box located on Jeep Compass? Read Answer
    • Compass 2006-2016 - Where is the Jeep Compass cigarette lighter fuse located? Read Answer
    • Compass 2016-2025 - Where is the Start & Stop system fuse located in the Jeep Compass? Read Answer
    • Compass 2006-2016 - Where are the fuses of the Jeep Compass located? Read Answer
    • Compass 2016-2025 - Why does the Start and Stop of a Jeep Compass not work? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos