Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Battery Replacement and Maintenance

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Battery

See other generations:
Video tutorial

Release and lift the bonnet, securing it with the prop rod, and locate the battery position, which is on the front passenger side next to the engine. The steps to perform are as follows: remove the negative cable, followed by the positive cable, identified by the black and red colours respectively.

Now, remove the bolts securing the battery and take out the old battery, then install the new battery. Reverse the steps for reassembly.


Updated on 24 February 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Warning Light on a 2019 Jeep Wrangler
How to Reset the Oil Warning Light on a 2019 Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) The service light on the 2019 Jeep Wrangler must be reset only after having the service carried out at a workshop. The service includes the replaceme…
Replacing the Battery on a Jeep Wrangler
Replacing the Battery on a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) Is the battery of your Jeep Wrangler damaged? Remove the damaged battery from the engine compartment. Unlock and lift the front bonnet, releasing the…
How to Replace the Battery in a Jeep Wrangler?
How to Replace the Battery in a Jeep Wrangler?
Jeep Wrangler (2007-2018 / JK, MK 3) In this tutorial, you will see how to replace the battery in the Jeep Wrangler. For this simple and quick operation, you will need a 10mm socket and,…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos