Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Jeep Wrangler?

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Battery

See other generations:
Video tutorial

In this tutorial, you will see how to replace the battery in the Jeep Wrangler. For this simple and quick operation, you will need a 10mm socket and, of course, a good replacement battery.

First, ensure that the key is not in the ignition, then open the bonnet and proceed to unscrew the nuts on both terminals, always starting with the negative. Next, disconnect them and unscrew the single bolt that can be found at the bottom of the battery.

At this point, fit the replacement by following the procedure in reverse and reconnecting the positive terminal first.


Updated on 11 May 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery on the Jeep Wrangler 3
How to Replace the Key Battery on the Jeep Wrangler 3
Jeep Wrangler (2007-2018 / JK, MK 3) When the key for your Jeep Wrangler third series suddenly stops working, you don’t necessarily need to buy a new one. You can solve the problem by re…
How to Replace the Battery in My Jeep Wrangler
How to Replace the Battery in My Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) In this brief video, you can see the steps to remove and replace the battery located in the engine bay of the third generation Jeep Wrangler. First, …
How to Replace the Battery in the Jeep Wrangler
How to Replace the Battery in the Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) In today's video, we will see the procedure necessary to remove and replace the battery in the Jeep Wrangler in simple and quick steps. First, open t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos