Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil light on the Jeep Wrangler

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Service warning light

In this video we can see how to reset the oil change indicator light on the 2017 Jeep Wrangler. This procedure is very simple and quick to perform, it will take less than a minute to complete and no special tools or software are needed. To perform this procedure, simply start the instrument panel without starting the engine, then press the accelerator pedal 3 times, then turn off and on the panel. When restarting the panel, the procedure will be complete. Once the procedure is completed, you can press the menu button to verify that the procedure was successful.

Posted on 17 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service on a Jeep Wrangler?
How to Reset the Service on a Jeep Wrangler?
Jeep Wrangler (2018-2026 / JL, MK 4) In this tutorial, you will see how to reset the service on a Jeep Wrangler, a very simple and quick operation to perform only after completing all sc…
How to Reset the Oil Service Light in the Jeep Wrangler?
How to Reset the Oil Service Light in the Jeep Wrangler?
Jeep Wrangler (2007-2018 / MK 3, JK) In the Jeep Wrangler JK, after changing the oil and filter, you need to manually reset the corresponding warning light. First, insert the key and tur…
How to Reset the Oil Light on a Jeep Wrangler
How to Reset the Oil Light on a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) To manually and independently reset the engine oil light on your Jeep Wrangler Mk3, follow these simple steps in this mini guide. First, enter the ca…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos