Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Jeep Grand Cherokee?

Model: Jeep Grand Cherokee WK2, MK 4 - Years 2010-2021
Part: Service warning light

To reset the Service light on the instrument panel of the Jeep Grand Cherokee, you need to press the ignition button after inserting the key, in order to turn on the instrument panel without starting the vehicle. At this point, you will need to press the brake pedal and at the same time press the accelerator pedal all the way down three times. Once this is done, you will need to turn off the instrument panel. When it is turned on again, you can verify that the Service light has been correctly reset and will no longer be displayed.

Posted on 11 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the "Service" light on a Jeep Grand Cherokee?
How to reset the "Service" light on a Jeep Grand Cherokee?
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) To reset the "Service" light on a Jeep Grand Cherokee, start by turning on the instrument panel without starting the engine. Use the buttons on the s…
How to Reset the Service Light on the Jeep Grand Cherokee
How to Reset the Service Light on the Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) In today's video, we will see how to reset the service light on the Jeep Grand Cherokee. First, remember to carry out the correct maintenance on your…
Resetting the Service Light of the Jeep Grand Cherokee
Resetting the Service Light of the Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) In this video tutorial, learn how to reset the service light of the Jeep Grand Cherokee by following the instructions below. First, get inside the ve…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos