Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front bumper on the KIA Soul?

Model: Kia Soul SK3 - Years 2019-2026
Part: Front bumper

In this tutorial, we can see how to disassemble the front bumper on the KIA Soul, a very simple and quick operation. First, we open the hood, then we remove all the plastic rivets placed on the lower edge of the bumper and those inside the wheel arches. We then unscrew all the bolts indicated using a 10mm socket wrench, remove the top cover of the grille, and continue by unscrewing the remaining bolts. At this point, all that's left is to separate the bumper from the frame, disconnect the connectors of the fog lights, and install any replacement following the reverse procedure.

Posted on 17 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp of a Kia Soul
How to Replace the Front Headlamp of a Kia Soul
Kia Soul (2013-2018 / MK 2) Before you start, open the bonnet of your Kia Soul. Begin by unscrewing and removing the bolts that secure the front headlamp to the vehicle. Next, d…
Replacing the Rear Bumper on a Kia Soul
Replacing the Rear Bumper on a Kia Soul
Kia Soul (2008-2014 / MK 1) Is the bumper of your Kia Soul damaged? Here’s how to remove it from the rear of the Kia Soul. Open and lift the tailgate of the boot, and using a so…
How to remove the front headlight of the Kia Soul
How to remove the front headlight of the Kia Soul
Kia Soul (2008-2014 / MK 1) Today we will discover the instructions that will allow us to disassemble and replace the front headlight and its bulbs of the Kia Soul. First, we op…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos