Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Instrument Cluster from the Dashboard of a Lancia Ypsilon

Model: Lancia Ypsilon 843, MK 2, Ypsilon 2, Y2 - Years 2003-2011
Part: Instrument cluster

How do you remove the instrument cluster from the dashboard of a Lancia Ypsilon? Pay close attention to this video to proceed with the correct disassembly without issues. Remove the plastic trim from the lower cover of the instrument cluster, detach it from the dashboard, then unscrew the securing screws of the arch cover on the instrument cluster using a screwdriver. Pull out the previously removed piece and take out the instrument cluster from the dashboard (disconnect the power cable). Once the piece is removed, fit a new one or (replace the LEDs/bulbs in the cluster) refit the same one. Finally, proceed in reverse for the assembly operations.

Updated on 28 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) How do you remove the instrument cluster from a Lancia Ypsilon? Here’s how to proceed with the correct disassembly without issues: remove the plastic…
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) In this video tutorial, you can see how to remove the instrument cluster from a Lancia Ypsilon by following a few simple steps. If you want to polish…
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) In this video, you will see instructions on how to remove the instrument cluster of a second series Lancia Ypsilon. First, get inside the car and equ…

Other guides you may be interested in

    Frequently Asked Questions

    • Ypsilon 2011-2023 - The instrument cluster of my Lancia Ypsilon no longer works, what can I do? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos