Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lancia
    3. :
  3. Ypsilon
    4. : How to replace the dead battery of the remote control key of a Lancia ypsilon

Lancia Ypsilon - Video tutorial

Model: Lancia Ypsilon Y2, 843, Ypsilon 2, MK 2 - Years 2003-2011
Part: Key
Operation: How to replace the dead battery of the remote control key of a Lancia ypsilon

How to replace the dead battery of the remote control key of a Lancia ypsilon? Let's see in this video in detail how to do it: take our remote control and press the button to release the metal key. Once extracted we go with a screwdriver to unscrew the tiny screw (placed inside), remove the worn battery from the housing. We take a new battery of the same size and voltage and mount it in its housing. We insert the battery holder in the cover and screw the same and insert the key in the slot. Finally, we check the exact functioning of the remote control.


Posted on 22 October 2023 by ScegliAuto

    Frequently Asked Questions

    • Ypsilon 2011-2023 - Why does the Lancia Ypsilon Mk3 remote control no longer work correctly? Read Answer
    • Ypsilon 2011-2023 - Why does the Lancia Ypsilon central locking no longer work? Read Answer
    • Ypsilon 2011-2023 - What does the padlock light on my Lancia Ypsilon mean? Read Answer
    • Ypsilon 2003-2011 - How to open the fuel tank of the Lancia Ypsilon? Read Answer
    • Ypsilon 2003-2011 - Why doesn't the Lancia Y open? Read Answer
    • Ypsilon 2011-2023 - What does the light with the padlock on my Lancia Ypsilon indicate? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos