Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil in the Lancia Kappa 2.4 JTD?

Model: Lancia Kappa MK 1 - Years: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Engine oil

Video tutorial

In this tutorial, we can see how to replace the engine oil in the Lancia Kappa 2.4 JTD, a very simple and quick operation. First of all, let's make sure that the engine is completely cold, after which we open the hood and lift the front side, taking all necessary safety precautions.

Next, we go underneath the vehicle, remove the cover, unscrew the drain hole bolt with a Torx T50 wrench, and let all the oil contained in the system drain out. At this point, all that’s left to do is unscrew the old filter, tighten the replacement, reassemble everything, and add the necessary amount of oil through the designated upper hole.


Posted on 24 December 2025 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on the Lancia Kappa
How to Replace the Front Brake Pads on the Lancia Kappa
Lancia Kappa (1994-2002 / MK 1) Today we will see the necessary instructions to dismantle and replace the front brake pads on the Lancia Kappa. First, raise the vehicle and start by…
How to Replace the Air Filter on a Lancia Kappa
How to Replace the Air Filter on a Lancia Kappa
Lancia Kappa (1994-2002 / MK 1) In this guide for the Lancia Kappa, you will learn a very simple method to replace the air filter in a few easy steps. Before starting, remember that…
Repairing the Paintwork on a Lancia Kappa
Repairing the Paintwork on a Lancia Kappa
Lancia Kappa (1994-2002 / MK 1) Learn how to repair the paintwork on a Lancia Kappa, starting with surface preparation, primer, and spray painting. Begin with a rather degraded situ…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos