Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lancia
    3. :
  3. Delta
    4. : How to top up the engine oil on a 2008 Lancia Delta?

Lancia Delta - Video tutorial

Model: Lancia Delta MK 3 - Years 2008-2014
Part: Engine oil
Operation: How to top up the engine oil on a 2008 Lancia Delta?

Here we have a short video that summarizes the fundamental steps to properly top up the engine oil on a 2008 Lancia Delta. Let's always remember that the engine oil we are adding must have the specific characteristics for our car. These are indicated in the vehicle's user manual. After parking the car on a flat surface, we wait for 10 minutes to let the engine cool down, then we open the front hood, unscrew the oil tank cap, and check the level using the designated dipstick. We pour the oil little by little, always continuing to check the level. When it is very close to the maximum limit, we can close the oil tank cap and the hood.


Posted on 11 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Delta 2008-2014 - What is the right amount of engine oil for the Lancia Delta 1.6 multijet? Read Answer
    • Delta 2008-2014 - How much engine oil on Lancia Delta 1600? Read Answer
    • Delta 1979-1993 - Amount of engine oil for Lancia Delta Hf Read Answer
    • Delta 1979-1993 - How much engine oil does a Lancia Delta HF Integrale contain? Read Answer
    • Delta 2008-2014 - How many liters of oil go into the Lancia Delta 1.6 mjt engine? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos