Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove Oil and Filter on a Lancia Lybra

Model: Lancia Lybra MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Engine oil

Video tutorial

Here’s how to remove oil and filter on a Lancia Lybra: lift the car on a column lift or suitable jack, locate the bolt of the oil sump and unscrew it (as shown in the video); using a strap wrench, unscrew the oil filter (you can also use a chain wrench) located under the engine.

Once the oil filter is removed, take it out of the vehicle (replace it with a new filter).

Finally, install the new oil filter in its housing (clean any oil residue) and tighten it with the appropriate strap wrench. Close the bonnet after topping up the new oil in the engine.


Updated on 8 March 2026 by ScegliAuto


Related tutorials

How to Remove the Pedal Pump on a Lancia Lybra
Lancia Lybra (1998-2005 / MK 1) How to remove the pedal pump from a Lancia Lybra. Open the car door, then locate the part to work on: unscrew the pins with a socket spanner, being c…
How to Remove the Front Door Panel on a Lancia Lybra
How to Remove the Front Door Panel on a Lancia Lybra
Lancia Lybra (1998-2005 / MK 1) In today's video tutorial, learn how to remove the front door panel of a Lancia Lybra in simple and quick steps. First, open the front door and start…
How to Remove the Centre Console with Radio from a Lancia Lybra
How to Remove the Centre Console with Radio from a Lancia Lybra
Lancia Lybra (1998-2005 / MK 1) In this video, learn how to remove the centre console along with the radio from a Lancia Lybra. First, use a plastic lever to remove the drawers loca…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos