Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil engine light on the Land Rover 2025

Model: Land Rover Defender L663 - Years 2020-2026
Part: Service warning light

If you own the new Land Rover Defender 2025 and are wondering how to properly complete the manual reset of the oil light, then this guide is all you need. First, get into the car and make sure to leave the driver's side door open. Then unlock the front hood release by pressing the lever located in the lower left area of the dashboard. At this point, start the instrument panel by holding down the brake and accelerator pedals until the oil light reset is completed.

Posted on 15 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on the 2025 Land Rover Defender
How to Reset the Oil Light on the 2025 Land Rover Defender
Land Rover Defender (2020-2026 / L663) If you recently changed the engine oil and filter on your 2025 Land Rover Defender, but the warning light continues to appear on the dashboard, follo…
How to reset the oil light on the Land Rover Defender
How to reset the oil light on the Land Rover Defender
Land Rover Defender (2020-2026 / L663) To manually reset the oil engine light of your Land Rover, simply follow the steps described in the following procedure. First of all, you must go in…
How to reset the service in the Land Rover Defender?
How to reset the service in the Land Rover Defender?
Land Rover Defender (2020-2026 / L663) In this tutorial, we can see how to reset the service in the Land Rover Defender, an extremely simple and quick operation to be carried out only once…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos