Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Land Rover Defender

Model: Land Rover Defender L663 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Service warning light

See other generations:
Video tutorial

To reset the service light on a Land Rover Defender, open the driver's side door and the hood release lever. Turn on the ignition without starting the engine.

Press and hold the brake pedal. While holding it, also press the accelerator pedal and keep both pressed.

After a few seconds, the system enters reset mode, and the display shows confirmation or the reset of the maintenance interval. Continue holding the pedals until the reset is complete.

Release the brake and accelerator, turn off the ignition, and close the hood. Turn it back on to check that the service light has been cleared.


Posted on 25 April 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Light on the 2025 Land Rover Defender
How to Reset the Oil Light on the 2025 Land Rover Defender
Land Rover Defender (2020-2026 / L663) If you recently changed the engine oil and filter on your 2025 Land Rover Defender, but the warning light continues to appear on the dashboard, follo…
How to Reset the Onboard Computer in the Land Rover Defender?
How to Reset the Onboard Computer in the Land Rover Defender?
Land Rover Defender (2020-2026 / L663) In this tutorial, you will see how to reset the onboard computer in the Land Rover Defender, a very simple and quick operation that you can perform a…
How to Replace the Gear Shift Knob on a Land Rover Defender?
How to Replace the Gear Shift Knob on a Land Rover Defender?
Land Rover Defender (1983-1990 / MK 5) To replace the gear shift knob on a Land Rover Defender, loosen the nut at the base of the knob using a wrench. Once the nut is loosened, you can rot…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos