Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Battery on Range Rover

Model: Land Rover Range Rover L322, MK 3 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Battery

See other generations:
Video tutorial

Remove the damaged battery from the Range Rover? Start by opening the car door and releasing the hood latch. Lift the hood, disengaging the safety latch with your fingers, then secure it. Once the hood is open, you will find the battery covered by its cover in the upper left.

Remove the plastic cover, unscrew the battery terminal clamps, then take the battery out of the engine compartment. Replace the old battery with a new one (same voltage).

Close the hood after maintenance. Test the vehicle's operation.


Updated on 20 March 2026 by ScegliAuto


Related tutorials

Replacing the Battery in the Land Rover Range Rover Sport
Replacing the Battery in the Land Rover Range Rover Sport
Land Rover Range Rover (2002-2012 / L322, MK 3) Today, let's go through the instructions to remove and replace the battery in the Land Rover Range Rover Sport. First, open the trunk and start by re…
Remove the Battery from a Range Rover Sport
Remove the Battery from a Range Rover Sport
Land Rover Range Rover (2012-2021 / MK 2) Remove the battery from a Range Rover Sport? Let's see how to replace the damaged battery. Open the vehicle's door and pull up the hood release lever…
How to Replace the Remote Battery on a Land Rover Range Rover?
How to Replace the Remote Battery on a Land Rover Range Rover?
Land Rover Range Rover (2012-2021 / MK 2) Replacing the remote battery on a Land Rover Range Rover, as shown in this tutorial, is an extremely simple and quick operation. For this, you will n…

Other guides you may be interested in

    Frequently Asked Questions

    • Range Rover 2012-2021 - Where are the Range Rover Sport batteries located? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos