Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on a Range Rover Sport

Model: Land Rover Range Rover L322, MK 3 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Battery

See other generations:
Video tutorial

Is the battery on your Range Rover Sport damaged? Remove the damaged battery from under the hood. Open the car door and disengage the hood release lever, then lift the front hood, releasing the locking lever with your fingers.

Once the hood is open, you will find the battery on the right. Remove the plastic cover, unscrew the battery terminal clamp bolts, and take the battery out of the engine compartment.

Install the new battery (same voltage). Close the hood after maintenance.

Test the engine's operation at startup.


Updated on 20 March 2026 by ScegliAuto


Related tutorials

Replacing the Battery in the Land Rover Range Rover Sport
Replacing the Battery in the Land Rover Range Rover Sport
Land Rover Range Rover (2002-2012 / L322, MK 3) Today, let's go through the instructions to remove and replace the battery in the Land Rover Range Rover Sport. First, open the trunk and start by re…
How to Change the Key Battery on Range Rover Sport
Land Rover Range Rover (2002-2012 / L322, MK 3) Is the battery in your Range Rover Sport key due for replacement? Let’s replace it. First, take the remote key and separate the metal key located on …
How to Set the Time on a Range Rover Sport
How to Set the Time on a Range Rover Sport
Land Rover Range Rover (2012-2021 / MK 2) Before you begin, sit in the driver's seat of your Range Rover Sport. Start by activating the onboard computer by pressing the power button located o…

Other guides you may be interested in

    Frequently Asked Questions

    • Range Rover 2012-2021 - Where are the Range Rover Sport batteries located? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos