Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Turbocharger on a Land Rover Evoque 2.2?

Model: Land Rover Evoque L538, MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Turbocharger

See other generations:
Video tutorial

In this tutorial video, you will learn how to remove the turbocharger on a Land Rover Evoque 2.2 by following the instructions below. First, open the hood and start by removing the upper plastic cover; then disconnect the air intake hose, subsequently removing the lower plastic part located under the wipers.

At this point, remove the battery and then take out the central metal partition; now disconnect the turbo from the exhaust system by unscrewing the bolts to remove it: follow the video to understand all the steps better.


Updated on 25 April 2026 by ScegliAuto


Related tutorials

Where Are the Fuse Boxes in the Land Rover Evoque?
Where Are the Fuse Boxes in the Land Rover Evoque?
Land Rover Evoque (2018-2026 / MK 2, L551) The Land Rover Evoque has three fuse boxes instead of the usual two commonly found in most vehicles. The first two are located in standard positions.…
Replacing the Cabin Air Filter in the Land Rover Evoque
Replacing the Cabin Air Filter in the Land Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) This guide provides instructions to remove and replace the cabin air filter in the Land Rover Evoque. First, get inside the vehicle on the front pass…
How to replace the gear knob of the Land Rover Evoque
How to replace the gear knob of the Land Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) Replacing the gear knob in your first series Land Rover Evoque is really simple. To complete the operation in a few minutes, just read the following …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos