How to Remove and Replace the Turbocharger on a Land Rover Discovery 3

Model: Land Rover Discovery MK 3, LR3, Discovery 3, L319 - Years 2004-2010
Part: Turbocharger

Let's see how to remove and replace the turbocharger on a Land Rover Discovery 3. Open the hood, lift it, and remove the soundproofing panel from the engine compartment (if present). Remove the turbocharger mounting bolts (located in the engine compartment) using a socket wrench (appropriate sockets), take out the valve from the engine seat, and disconnect the various supply clamps with a screwdriver or needle-nose pliers. After comparing the damaged valve with the new one, install it on the engine block located in the compartment; tighten it securely with the bolts and reconnect the clamps. Test the proper functioning of the vehicle.

Updated on 4 March 2026 by ScegliAuto

This video is currently unavailable

Other guides you may be interested in

Engine - Maintenance and repair on other vehicles

Seat - Maintenance and repair on other vehicles

- Maintenance and repair on other vehicles

Turbocharger - Maintenance and repair on other vehicles

Valve - Maintenance and repair on other vehicles

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!

by ScegliAuto

How to Remove and Replace the Turbocharger on a Land Rover Discovery 3

Related tutorials

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

More videos