Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Suspension Relay on a Land Rover Discovery 3?

Model: Land Rover Discovery MK 3, LR3, Discovery 3, L319 - Years 2004-2010
Part: Fuse box

When an error message appears on the dashboard of the Land Rover Discovery indicating a suspension malfunction, it is highly likely that you need to replace the relay that controls its operation. To replace this relay, open the hood and access the engine compartment to locate the fuse box: the relays will be inside it. The fuse box is located on the right side of the engine compartment, just below the windshield: the relay is the first one at the top right. Once you have removed it with pliers, you can insert a new one with the same voltage.

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the OBD Port of the 2016 Land Rover Discovery
Land Rover Discovery (2010-2016 / Discovery 4, MK 4, LR4) Finding the OBD port in your 2016 Land Rover Discovery is very simple, and with the following guide, it will literally take you just a few seconds. F…
How to Replace the Driveshaft on a Land Rover Discovery?
How to Replace the Driveshaft on a Land Rover Discovery?
Land Rover Discovery (1998-2004 / MK 2, Discovery 2, L318) To replace the driveshaft on a Land Rover Discovery, lift the vehicle using a jack or a lift to access the underside. Here, you will find the drivesh…
How to Reset the "Service" Light on a Land Rover Discovery
How to Reset the "Service" Light on a Land Rover Discovery
Land Rover Discovery (2017-2024 / L462, Discovery 5, MK 5) Before starting, ensure that the driver door and the hood are open. Activate the instrument cluster of your Land Rover Discovery without starting the…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos