Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Top Off the Coolant on a Land Rover Evoque

Model: Land Rover Evoque L551, MK 2 - Years 2018-2026
Part: Antifreeze coolant

In this short video tutorial, we will see how to top off the coolant on a second-generation Land Rover Evoque. It is recommended to perform this operation with the engine cold and the vehicle parked on a level surface. First, open the hood by pulling the release lever inside the cabin, then lift it. Now locate the coolant reservoir, which is on the left side of the engine bay. To top off the coolant, simply unscrew the cap of the reservoir and add the necessary fluid until it reaches a level between the MIN and MAX marks.

Updated on 24 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Coolant in a Land Rover Evoque?
How to Replace the Coolant in a Land Rover Evoque?
Land Rover Evoque (2011-2018 / L538, MK 1) In this tutorial, you will see how to replace the coolant in a Land Rover Evoque, a very simple and quick operation. First, wait for the engine to co…
How to top up the AdBlue on the Land Rover Evoque
How to top up the AdBlue on the Land Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) Shortly, we will see the instructions that will allow us to top up the AdBlue fluid on the Land Rover Evoque. First, we open the hood of the car and …
How to replace the gear knob of the Land Rover Evoque
How to replace the gear knob of the Land Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) Replacing the gear knob in your first series Land Rover Evoque is really simple. To complete the operation in a few minutes, just read the following …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos