Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Evoque
    4. : How to reset the service light in Range Rover Evoque

Land Rover Evoque - Video tutorial

Model: Land Rover Evoque MK 1, L538 - Years 2011-2018
Part: Instrument cluster
Operation: How to reset the service light in Range Rover Evoque

In today's video we see how to reset the service deadline in the Range Rover Evoque. Proceed by turning on the vehicle ignition, then move within the menu selection using the arrows located on the right spoke of the steering wheel. Once this is done, we confirm that we want to perform the reset, then we wait a few seconds until the operation is completed. We remind you to carry out this operation only after carrying out the maintenance recommended by the parent company and reported in the on-board manual. We can then finish the job in progress and turn off the car.


Posted on 9 May 2023 by ScegliAuto

    Frequently Asked Questions

    • Evoque 2011-2018 - What does the AdBlue warning light on the Land Rover Evoque indicate? Read Answer
    • Evoque 2011-2018 - Sos Land Rover Evoque with limited functionality due to problems? Read Answer
    • Evoque 2011-2018 - Does the sos system limited functionality of the Range Rover Evoque from problems? Read Answer
    • Evoque 2011-2018 - What to do if the coolant warning light appears in Range Rover Evoque? Read Answer
    • Evoque 2011-2018 - What does the engine light indicate in the Land Rover Evoque? Read Answer
    • Evoque 2011-2018 - What does the Land Rover Evoque low performance light mean? Read Answer
    • Evoque 2011-2018 - What does the service light on the Land Rover Evoque indicate? Read Answer
    • Evoque 2018-2025 - What does it mean when "SOS limited functionality" ? appears on Range Rover Evoque? Read Answer
    • Evoque 2011-2018 - Why does the engine failure warning light appear on Range Rover Evoque? Read Answer
    • Evoque 2011-2018 - Limited performance warning light on Range Rover cars, what does it mean? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos