Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Freelander
    4. : Cabin air filter replacement

Land Rover Freelander - Video tutorial

Model: Land Rover Freelander Freelander 1 - Years 1997-2006
Part: Cabin air filter
Operation: Cabin air filter replacement

The passenger compartment air filter is located just behind the console of the central tunnel but it is possible to access the air duct from the side, from the passenger side; once the filter seat has been intercepted, unscrew the four fixing screws of the cap which is actually integrated into the filter support itself and extract it from its seat by rotating it during the extraction maneuver; remove any residual dirt inside the filter seat and insert the new one (choose the activated carbon one if available) by bending it during the insertion maneuver and then fasten it with the four screws.


Posted on 2 September 2023 by ScegliAuto



Cabin air filter replacement
Land Rover Freelander (1997-2006 / Freelander 1) The cabin filter is located on the passenger side, under the glove compartment, immediately above the door sill; consider that the cap is an integral
How to replace the cabin air filter on Land Rover Freelander 2
Land Rover Freelander (2006-2016 / Freelander 2) Although the position in which the cabin air filter of your Land Rover Freelander 2 is located is not among the easiest and most comfortable to reach
How to replace the cabin air filter on Freelander
Land Rover Freelander (1997-2006 / Freelander 1) How to remove the pollen filter on Land Rover Freelander. The cabin filter is found at the bottom right of the glove box. With a plastic lever we pee

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos