Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Evoque
    4. : How to reset the service light on the Range Rover Evoque

Land Rover Evoque - Video tutorial

Model: Land Rover Evoque MK 1, L538 - Years 2011-2018
Part: Instrument cluster
Operation: How to reset the service light on the Range Rover Evoque

The manual reset of the service light on your Land Rover Evoque first generation (year 2011-2018) is a very simple operation to perform, and thanks to the following mini guide, you will have no difficulty. First, go inside the car, insert the key, and turn on the instrument panel. Immediately after, you must hold down both the brake pedal and the accelerator pedal simultaneously for a few seconds. Then, wait for the completion of the reset, confirmed by a message that appears on the display, and finally, release both pedals to complete the procedure.


Posted on 13 September 2023 by ScegliAuto

    Frequently Asked Questions

    • Evoque 2011-2018 - What does the AdBlue warning light on the Land Rover Evoque indicate? Read Answer
    • Evoque 2011-2018 - Sos Land Rover Evoque with limited functionality due to problems? Read Answer
    • Evoque 2011-2018 - Does the sos system limited functionality of the Range Rover Evoque from problems? Read Answer
    • Evoque 2011-2018 - What to do if the coolant warning light appears in Range Rover Evoque? Read Answer
    • Evoque 2011-2018 - What does the engine light indicate in the Land Rover Evoque? Read Answer
    • Evoque 2011-2018 - What does the Land Rover Evoque low performance light mean? Read Answer
    • Evoque 2011-2018 - What does the service light on the Land Rover Evoque indicate? Read Answer
    • Evoque 2018-2025 - What does it mean when "SOS limited functionality" ? appears on Range Rover Evoque? Read Answer
    • Evoque 2011-2018 - Why does the engine failure warning light appear on Range Rover Evoque? Read Answer
    • Evoque 2011-2018 - Limited performance warning light on Range Rover cars, what does it mean? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos