Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Timing Belt on a Lexus IS 200

Model: Lexus IS MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Timing belt

See other generations:
Video tutorial

Today, we will discover the steps to remove and replace the timing belt on a Lexus IS 200. First, open the bonnet of the vehicle and start by draining the engine coolant, removing the intake duct and disconnecting the pipe; then disconnect the temperature sensor and subsequently the serpentine belt, as shown in the video.

At this point, remove the power steering pump, then remove the timing cover; take the necessary references for replacing the timing belt, installing the new original one.


Posted on 10 March 2026 by ScegliAuto


Related tutorials

Timing Belt Replacement
Timing Belt Replacement
Lexus IS (1998-2005 / MK 1) Replacing the timing belt requires a certain knowledge of mechanics, as it is essential to maintain the timing references during disassembly and reas…
Instructions for Replacing the Water Pump
Instructions for Replacing the Water Pump
Lexus IS (1998-2005 / MK 1) The water pump is driven by the timing belt, therefore it is suggested to carry out this repair only if you have good mechanical knowledge, as a mist…
V-Belt Replacement Instructions
Lexus IS (2013-2024 / MK 3) Replacing the V-belt or auxiliary belt is quite straightforward. It is important to note the routing of the belt around the various pulleys before re…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos