Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Lexus
  4. :
  5. NX
  6. : How to remove the dashboard of the Lexus NX 200

Lexus NX - Video tutorial

Model: Lexus NX MK 1 - Years 2014-2021
Part: Dashboard
Operation: How to remove the dashboard of the Lexus NX 200

Contrary to what one might imagine, the disassembly of the dashboard of your Lexus NX 200 is not an impossible operation to carry out independently. First you need to make sure you have turned off the engine, then go to the passenger side and remove the dashboard side cover with the aid of a flat screwdriver. Immediately after, do the same for the upper part of the dashboard (passenger side) and the glove compartment. At this point you can switch to the driver's side. First of all, remove the air intake vent located at the end of the dashboard, being careful to disconnect the connector as well. Then unscrew the screw and remove the lower nozzle as well. Now all that remains is to remove the plastic covers around the instrumentation of the on-board computer and, finally, also remove the car radio. The operation is finished, but if you want you can also continue with the removal of the steering wheel.


Posted on 16 August 2022 by ScegliAuto

Other guides that may interest you

Where are the fuses of the Volvo FH located?

All the fuses of the Volvo FH are located inside the fuse box located in the vehicle cabin: in order to access the box it will be necessary to unhook the internal fixing clips that block the panel in the upper part of the dashboard, along its entire length. extension. Once this panel has been removed, it will be possible to access the fuses and replace them if necessary: here it will be possible to identify the fuses that take care of the operation of the windshield wipers, the cigarette lighter, the headlights, etc. In the vehicle manual each fuse is indicated with its amperage.

Watch the video!


by ScegliAuto

More videos