Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lexus
    3. :
  3. ES
    4. : How to reset the service light on Lexus Es 350

Lexus ES - Video tutorial

Model: Lexus ES Xv40, - Years 2006-2012
Part: -board computer
Operation: How to reset the service light on Lexus Es 350

In this video tutorial we can see how you can reset the maintenance light on a Lexus Es 350 by following a few simple steps that will guide you towards correct vehicle management. If the service light (wrench) comes on, first of all you need to replace the engine oil and filters; then you have to get on board and sit in the driver's seat; at this point you have to turn on the ignition and press the button on the dashboard until you find the TRIP A message on the display. At this point you have to turn off the ignition and hold down the button on the dashboard to the right of the speedometer, simultaneously press the ignition button instrument cluster, continue to hold the button in the dashboard until the reset is completed. To check that the warning light has gone out, turn the ignition off and on again.


Posted on 17 November 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos