Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light in a Lexus NX 300h?

Model: Lexus NX MK 1 - Years 2014-2021
Part: Service warning light

In this tutorial, you will see how to reset the service light in a Lexus NX 300h, an extremely simple and quick operation to perform only after completing all required scheduled maintenance tasks. Start by entering the cabin, then insert the key and switch on the instrument cluster. Next, navigate to the settings menu using the directional arrows on the steering wheel, enter "Vehicle Settings", then "Scheduled Maintenance", and confirm the reset using the appropriate option. Similarly, you can reset the oil service light.

Updated on 8 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure light in the Lexus NX 300h?
How to reset the tire pressure light in the Lexus NX 300h?
Lexus NX (2014-2021 / MK 1) In this tutorial, we can see how to reset the tire pressure warning light in the Lexus NX 300h, an extremely simple and quick operation, to be done o…
How to reset the tire pressure light in the Lexus NX 300h?
How to reset the tire pressure light in the Lexus NX 300h?
Lexus NX (2014-2021 / MK 1) In this tutorial, we can see how to reset the tire pressure warning light in the Lexus NX 300h, an extremely simple and quick operation, to be done o…
How to Reset the Tyre Pressure Light on the Lexus NX 300h
How to Reset the Tyre Pressure Light on the Lexus NX 300h
Lexus NX (2014-2021 / MK 1) In this tutorial, you will see how to reset the tyre pressure light on the Lexus NX 300h, a very simple and quick operation to be performed only afte…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos