Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lexus
    3. :
  3. IS
    4. : How to reset the tire warning light on the Lexus IS 350?

Lexus IS - Video tutorial

Model: Lexus IS MK 3 - Years 2013-2023
Part: Tires
Operation: How to reset the tire warning light on the Lexus IS 350?

In this tutorial, we can see how to reset the tire indicator light in the Lexus IS 350, an extremely simple and quick operation, to be done only once the correct tire pressure has been restored following the instructions in the manual. First of all, let's go inside the car, then insert the key and turn on the dashboard. Next, locate the button depicting the indicator light in question, located in the lower area of the dashboard on the driver's side, and hold it down for the necessary time until the light disappears completely. Finally, start the vehicle and drive a few kilometers.


Posted on 6 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Lexus Is 2013-2023 - How much should the Lexus is300h tire pressure be? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos