Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure light on the Lexus NX?

Model: Lexus NX MK 1 - Years 2014-2021
Part:

In this tutorial we can see how to reset the tire pressure light in the Lexus NX, an extremely simple and quick operation, to be performed only once the correct pressure of each tire has been restored following the instructions in the manual. First of all, let's go inside the cabin, then insert the key and turn on the instrument panel. Next, reach the settings menu using the directional arrows on the steering wheel, select the "TPMS" option and hold down the "OK" button for the necessary time for the light to disappear correctly.

Posted on 19 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tyre warning light in the Lexus NX 200T?
How to reset the tyre warning light in the Lexus NX 200T?
Lexus NX (2014-2021 / MK 1) Resetting the tyre warning light in the Lexus NX 200T, as shown in this tutorial, is a very simple and quick operation. Before proceeding, ensure you…
How to Reset the Tyre Pressure Warning Light in a Lexus NX?
How to Reset the Tyre Pressure Warning Light in a Lexus NX?
Lexus NX (2014-2021 / MK 1) In this tutorial, see how to reset the tyre pressure warning light in a Lexus NX, an extremely simple and quick operation. Before proceeding, ensure …
How to Reset the Tyre Warning Light on the Lexus NX?
How to Reset the Tyre Warning Light on the Lexus NX?
Lexus NX (2014-2021 / MK 1) In this tutorial, you will learn how to reset the tyre warning light on the Lexus NX. This operation is extremely simple and quick, to be performed o…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos