Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Deactivating the Passenger Airbag on a Lexus CT

Model: Lexus CT Zwa10 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Airbag

Video tutorial

Today, we will see how to deactivate the front passenger airbag on a Lexus CT, produced from 2011 to 2022. The operation is very simple to perform and can be done independently in just a few seconds. The passenger airbag "ON/OFF" switch is located on the right side of the dashboard, and to reach it, simply open the right front door.

Once at the switch, insert the vehicle key into it and turn it counterclockwise to the "OFF" position.


Updated on 18 October 2026 by ScegliAuto


Related tutorials

Where are the Fuses Located in the Lexus CT 200h?
Where are the Fuses Located in the Lexus CT 200h?
Lexus CT (2011-2022 / Zwa10) In this video, you can see where the fuse boxes are located in the Lexus CT 200h and their respective diagrams, useful if you need to check the fuses…
Reset the tire pressure warning of the Lexus CT
Reset the tire pressure warning of the Lexus CT
Lexus CT (2011-2022 / Zwa10) Below we will discover how to reset the tire pressure warning of the Lexus CT; before resetting the TPMS sensors, it is necessary that all four tires…
How do you reset the tire pressure warning light on the Lexus CT?
How do you reset the tire pressure warning light on the Lexus CT?
Lexus CT (2011-2022 / Zwa10) To reset the tire pressure warning light on the Lexus CT, you will need to inflate the tires until they reach the recommended pressure value, which i…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos