Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Cabin Air Filter in the Lincoln MKZ

Model: Lincoln Mkz MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Cabin air filter

See other generations:
Video tutorial

Follow the instructions below to remove and replace the cabin air filter in the Lincoln MKZ. First, open the front door on the passenger side and start removing the plastic cover located on the side of the dashboard. Next, open the glove compartment and remove the screws found inside, taking off the upper plastic cover as shown in the video.

At this point, pull out the glove compartment, disconnecting the electrical connector located at the back. Remove the plastic cover to take out and replace the cabin air filter with a new one!


Updated on 5 June 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter in a Lincoln MKZ
How to Replace the Cabin Air Filter in a Lincoln MKZ
Lincoln Mkz (2013-2020 / MK 2) Today, you will learn how to replace the cabin air filter in a Lincoln MKZ. First, get inside the cabin and open the glove compartment. Once removed,…
How to Replace the Cabin Air Filter in a 2019 Lincoln Mkz
How to Replace the Cabin Air Filter in a 2019 Lincoln Mkz
Lincoln Mkz (2013-2020 / MK 2) In this guide for your 2019 Lincoln Mkz Mk2, you will learn how to quickly and safely replace the cabin air filter. First, ensure that the vehicle is…
Replacement of the cabin air filter of the Lincoln MKZ
Replacement of the cabin air filter of the Lincoln MKZ
Lincoln Mkz (2013-2020 / MK 2) In a few simple steps, we will see how to disassemble and replace the cabin air filter of the Lincoln MKZ. First, open the front passenger door and b…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos