Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lincoln
    3. :
  3. Aviator
    4. : How to locate fuses and know their diagrams in a Limcoln Aviator

Lincoln Aviator - Video tutorial

Model: Lincoln Aviator MK 2 - Years 2020-2024
Operation: How to locate fuses and know their diagrams in a Limcoln Aviator

The first fuse panel of a Lincoln Aviator that is shown to us in the video can be located inside the passenger compartment of the vehicle, located in the lower left corner behind the steering column. This first panel has fuses assigned to: sunroof, telematics unit control module, wireless, steering column control module, data link connector, start button, headlight switch, Bluetooth module, audio, parking assistance, suspension module, display etc. In the engine compartment we can locate the next fuse box, and this contains: battery, fuel pump, solenoid, engine oil transmission, cooling fan, ignition coil, A / C, washer pump, anti-lock brake system, air quality sensor, battery towing trailer, headlight washer pump, electric windows, amplifier, injectors, rain sensor, USB sockets, etc.


Posted on 11 September 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Aviator 2020-2027 - What problems with the rough idle on the Lincoln Aviator? Read Answer
    • Aviator 2020-2027 - What vibration problems on the Lincoln Aviator? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos