Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lincoln
    3. :
  3. Navigator
    4. : How to reset the oil light on 2012 Lincoln Navigator

Lincoln Navigator - Video tutorial

Model: Lincoln Navigator U326 - Years 2007-2017
Part: Instrument cluster
Operation: How to reset the oil light on 2012 Lincoln Navigator

If the engine oil light comes on steadily on the dashboard of your 2012 Lincoln Navigator despite having recently changed the fluid, don't worry, just perform a simple manual reset procedure. First, go inside the car and start the instrument panel. Immediately afterwards, press the "Info" button located in the lower area of the central dashboard. At this point, as indicated on the display itself, press the "Reset" button to reset the warning light. Finally, turn off the ignition and the procedure is complete.


Posted on 15 December 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos