Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Lincoln
  4. :
  5. Mkc
  6. : How is the gas refilled in the Lincoln Mkc air conditioning system?

Lincoln Mkc - Video tutorial

Model: Lincoln Mkc MK 1 - Years 2015-2019
Part: Air conditioning
Operation: How is the gas refilled in the Lincoln Mkc air conditioning system?

The video guide published above is helpful in case it is necessary to recharge the refrigerant gas of the Lincoln Mkc air conditioning system. Open the bonnet, remove the plastic propeller protection and unscrew the aforementioned gas refill cap. At this point, the instrument panel comes on and the climate control is activated, making sure that the compressor starts. After that, having taken the gas bottle and installed the pressure measuring device in the upper part, the same is ascertained and proceeded with the refilling, until a pressure value of approximately 40 bar is reached. When finished, the previously removed cap is closed again, the climate control and the instrument panel are turned off, thus concluding the job.


Posted on 16 December 2022 by ScegliAuto

This video is currently unavailable

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos