Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install and Adjust the Rear Cargo Cover on the Lincoln Mkc

Model: Lincoln Mkc MK 1 - Years: 2015, 2016, 2017, 2018, 2019

Video tutorial

This description explains how to position, adjust, or remove the cargo cover panel of the vehicle: to position it, press inward on the two plastic terminals and slide the cover into the slots located just behind the rear seats. In the center of the panel, there is a handle that you should use to pull the panel towards you and slide it to the fastening hooks located just before the tailgate.

To detach it, press one of the two terminals inward and lift this corner; then the panel can be removed.


Updated on 30 June 2026 by ScegliAuto


Related tutorials

How to Replace the Front Wipers on the Lincoln MKC
How to Replace the Front Wipers on the Lincoln MKC
Lincoln Mkc (2015-2019 / MK 1) In today's tutorial, you will see step-by-step instructions to remove and replace the front wipers on the Lincoln MKC in simple steps. First, move to…
How to Replace the Rear Brake Pads on a Lincoln MKC?
How to Replace the Rear Brake Pads on a Lincoln MKC?
Lincoln Mkc (2015-2019 / MK 1) To replace the rear brake pads on a Lincoln MKC, lift the vehicle so that the corresponding rear wheel is off the ground. Once the wheel is lifted, l…
What is the Fuse Diagram for the Lincoln MKC?
What is the Fuse Diagram for the Lincoln MKC?
Lincoln Mkc (2015-2019 / MK 1) If a device in your Lincoln MKC suddenly stops working, the first thing to do is check the status of the respective fuses, the diagrams for which are…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos