Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Marazzo
    4. : How to replace the cabin air filter on Mahindra Marazzo

Mahindra Marazzo - Video tutorial

Model: Mahindra Marazzo MK 1 - Years 2018-2024
Part: Cabin air filter
Operation: How to replace the cabin air filter on Mahindra Marazzo

To replace the passenger compartment air filter of the Mahindra Marazzo, it is necessary to follow the following procedure: open the passenger side door and access the passenger compartment, locate the glove compartment under the dashboard, empty the compartment and locate the air filter housing cover. Using your fingers, unlock the lid support hooks located on the right and left of the compartment, and remove the lid and filter. Take the new filter (identify the type suitable for the car see use and maintenance manual) and insert it into the housing paying attention to the direction (upward arrow). Finally, close the filter door and the glove compartment door.


Posted on 25 April 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos