Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mahindra
  4. :
  5. Xylo
  6. : How to replace the cabin filter in the Mahindra Xylo?

Mahindra Xylo - Video tutorial

Model: Mahindra Xylo MK 1 - Years 2009-2019
Part: Cabin air filter
Operation: How to replace the cabin filter in the Mahindra Xylo?

In this tutorial we can see how to remove and then replace the cabin filter in the Mahindra Xylo, a very simple and fast operation. We start by opening the glovebox drawer on the passenger side, then, with the help of a small screwdriver, we release the two side blocks and extract the entire compartment from the dashboard. Once this is done, locate and open the long rectangular door, using the screwdriver again if necessary. At this point we can extract the old filter and replace it, following the reverse procedure to reassemble everything.


Posted on 8 May 2024 by ScegliAuto



How to change the fuel filter on a Mahindra Xylo.
Mahindra Xylo (2009-2019 / MK 1) In this video we are going to see how to replace the diesel filter on a Mahindra Xylo. The diesel filter is installed in the engine intake line, it s
How to replace the Mahindra Xylo diesel filter
Mahindra Xylo (2009-2019 / MK 1) Let's see in this guide how to disassemble and replace the Mahindra Xylo diesel filter, following the instructions below. First of all, we open the b
How do you replace the fuel filter on your Mahindra Xylo?
Mahindra Xylo (2009-2019 / MK 1) In order to replace the Mahindra Xylo diesel filter, you need to open the hood, so that you can access the components inside the engine compartment.

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos