|
Do it yourself
| |||
| ||||
How to change the engine oil of a Maruti Swift?
Model: Suzuki Maruti Swift
Rs413, Rs415, Rs413d
- Years 2005-2021
To change the engine oil of a Maruti Swift, start by parking the car on a flat surface and turning off the engine, letting it cool down to avoid burns. Lift the front part with a jack and secure it with stands. Locate the oil drain plug under the engine, located on the oil pan. Place a container under the plug to collect the used oil, then unscrew the plug with an appropriate wrench and let the fluid drain completely. Once finished, screw the drain plug back on making sure it is tightly secured to avoid leaks. Open the hood, locate the oil fill cap on the engine and pour the recommended amount from the vehicle manual, using a funnel to avoid spills. After finishing, start the engine for a few minutes, turn it off and check the oil level with the dipstick, adding if necessary until reaching the correct level.
Posted on 11 June 2025 by ScegliAuto
Video tutorial
Related tutorials
Suzuki Maruti Swift
(2005-2021 /
Rs413, Rs415, Rs413d)
These short and simple instructions will show us how to reset the maintenance service light for the oil change in the Maruti Swift, as well as the Su…
Suzuki Maruti Swift
(2005-2021 /
Rs413, Rs415, Rs413d)
If you want to be able to identify the box containing all the various fuses of your Maruti Swift, all you have to do is read the following guide and …
Suzuki Maruti Swift
(2005-2021 /
Rs413, Rs415, Rs413d)
The Service light reset on the Maruti Swift is done by pressing the appropriate button to turn on the instrument panel and then holding down the butt…
Other guides you may be interested in
|
How to replace the horn on a Renault Duster - Dacia Duster
Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.293
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |