Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Suzuki
    3. :
  3. Maruti Swift
    4. : How to replace the engine oil on the Maruti Swift.

Suzuki Maruti Swift - Video tutorial

Model: Suzuki Maruti Swift Rs413d, Rs415, Rs413 - Years 2005-2021
Part: Engine oil
Operation: How to replace the engine oil on the Maruti Swift.

We position the car on a flat surface, pull the handbrake for safety (electric parking brake or manual brake located on the central tunnel), unlock the front hood and lift it (lever under the dashboard). We unscrew the engine oil filler cap which we find to our left in the engine compartment. We lift the car with a jack (if we have a column lift even better). We place a container under the oil pan. We unscrew the drain plug with a wrench (position the drain plug at the end). We drain the used oil into the container. We locate the oil filter (near the oil pan), unscrew the cartridge filter with a strap wrench, chain or cup (use lubricant to lubricate and clean any residue). We install a new filter inside its container. We pour oil over the surface of the filter for better grip. We screw the oil filter under the engine base. We top up the engine with new oil (recommended by the manufacturer). We close the oil filler cap.


Posted on 9 May 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos