Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Transmission Oil of the Maruti 800

Model: Maruti 800 MK 1 - Years 1984-2014
Part: Transmission fluid

Today, you will learn how to replace the transmission oil of the Maruti 800 by following the instructions below. First, open the hood and start unscrewing the screw or dipstick for the transmission oil level; then lift the vehicle and remove the fastening screw located on the transmission case, allowing the oil to drain into a container for about ten minutes. At this point, pour in the new transmission oil with the correct viscosity; fill it up to the maximum level (about two quarts).

Updated on 16 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Axle of the Maruti 800
How to Replace the Front Axle of the Maruti 800
Maruti 800 (1984-2014 / MK 1) Today, follow this brief and simple guide to remove and replace the front axle of the Maruti 800. First, lift the vehicle and start loosening the cen…
How to Replace the Engine Oil on a Maruti 800
How to Replace the Engine Oil on a Maruti 800
Maruti 800 (1984-2014 / MK 1) To replace the engine oil and the oil filter on the vehicle, follow these steps: First, open the hood and lift the vehicle. Unscrew the oil fill cap.…
Where is the OBD port located in the Maruti 800?
Where is the OBD port located in the Maruti 800?
Maruti 800 (1984-2014 / MK 1) The OBD2 port or diagnostic socket on a Maruti 800 vehicle is located inside the cabin, specifically under the steering wheel near the fuse box. Unli…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos